Optional Accessories - Makita PC5010C Manual De Instrucciones

MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and unplugged before attempting to
perform inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always
using Makita replacement parts.
Replacing dust cover brush
Worn dust cover brushes can be replaced. To remove
the dust cover brushes, pull them off by using slotted
driver or other appropriate tool.
► Fig.17: 1. Dust cover brush (large) 2. Dust cover
brush (small)
Inserting new dust cover brushes into retaining grooves
by pushing down from above.
► Fig.18
At this time, ensure that dust cover brushes are fully
hooked onto hooks on outer edges of grooves.
► Fig.19: 1. Hook
Air vent cleaning
The tool and its air vents have to be kept clean.
Regularly clean the tool's air vents or whenever the
vents start to become obstructed.
► Fig.20: 1. Exhaust vent 2. Inhalation vent
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Cup-type diamond wheel
• Dust cover attachment
• Dust cover brush
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
10 ENGLISH