Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CONNECTION
-
Before connecting the power, make sure that the volume controls are at their minimum and the POWER
switch is off.
-
Connect the power supply cable to the mains.
-
Connect a line level signal to the loudspeaker LINE IN input, from the output of a mixer, a CD player, etc.
A USB storage device or SD memory card can also be connected. In this case, select the required audio
source using the MP3/LINE IN selector.
-
If you wish, dynamic microphones can be connected to INPUT 1, INPUT 2, INPUT 3 and INPUT 4.
-
Switch the loudspeaker on using the POWER switch on the rear panel.
-
Adjust the input volume to the required level using the corresponding controls.
-
The loudspeaker output provides a line level that can be taken to another amplified loudspeaker, mixer,
amplifier, recorder, etc.
-
Furthermore, if you wish, a passive loudspeaker can be connected to the SPEAKER OUTPUT terminal.
-
When not using the equipment, switch it off: turn the volume controls to minimum, deactivate it with the
POWER switch and disconnect the power supply from the mains.
SB-3612 (ASB-12150U)
SB-3615 (ASB-15180U)
AMP
- 5 -
PLAYER
EN
Tabla de contenido
