Connect Power - Grundig GSB 910 S Manual De Usuario

CONNECTIONS ________________________
Use the HDMI (ARC) Socket
ARC (Audio Return Channel)
• The ARC (Audio Return Channel) function al-
lows you to send audio from your ARC- com-
pliant TV to your sound bar through a single
HDMI connection. To enjoy the ARC function,
please ensure your TV is both HDMI-CEC and
ARC compliant and set up accordingly. When
correctly set up, you can use your TV remote
control to adjust the volume output (VOL +/-
and MUTE) of the sound bar.
• Connect the HDMI cable (not included) from
unit's HDMI (ARC) socket to the HDMI (ARC)
socket on your ARC compliant TV. Then press
the remote control to select HDMI ARC mode.
Note:
• Your TV must support the HDMI-CEC and ARC
and the HDMI-CEC and ARC must be set to
On.
• The setting method of HDMI-CEC and ARC
may dier depending on the TV. For details
about ARC function, please refer to the
owner's manual.
• Ensure that you use an HDMI cables that can
support the ARC function.
• HDMI-CEC will be called dierent names by
dierent manufacturers – please refer to your
owner's manual for details on setting up
HDMI-CEC and ARC.
Use the OPTICAL Socket
• Remove the protective cap of the OPTICAL
socket, then connect an OPTICAL cable (in-
cluded) to the TV's OPTICAL OUT socket and
the OPTICAL socket on the unit.
• Tip: While in HDMI ARC, OPTICAL mode, if
there's no sound output from the unit and the
status indicator flashes quickly, you may need
to activate PCM signal output on your source
device (eg. TV, DVD or Blu-ray player).
Use the AUX Socket
• A.; Use a 3.5mm to 3.5mm audio cable (in-
cluded) to connect the TV's or external audio
device headphone socket to the AUX socket
on the unit.
• B.; Use a RCA to 3.5mm audio cable (not in-
cluded) to connect the TV's audio output so-
ckets to the AUX socket on the unit.

Connect Power

Risk of product damage!
• Ensure that the power supply voltage corres-
ponds to the voltage printed on the back or the
underside of the unit.
• Before connecting the AC power cord, ensure
you have completed all other connections.
• Connect the mains plug of the main unit to a
mains socket.
Note:
• If there is no power, ensure the power cord
and plug are fully inserted and the power is
turned on.
ENGLISH 29