I N S T Allatio N - Sunbeam Products Oster OS-WSMD12002WBS Manual De Instrucciones

Insert the mice-proof plate into the washing machine base
Place the washing machine on a firm and level surface, use the level adjustable knob to
adjust the washing machine to be stable.
Place the washing machine at
least 5cm away from the wall.
When the level meter is
inclined to front,turn the
two feet left

i n s t allatio n

1.Take out the mice-proof plate.
3.Insert the noise-proof plate
into the base.
5 c m
When the level meter is
inclined to back,turn the
two feet right
Alteration of adjustable foot
In order to prevent vibration during wash
operation, you can loosen level adjustment
knob and change the height of the adjustable
foot until the washing machine is stable, and
then tighten it. (The inclination angle of the
washing machine should not be more than 2
degrees)
adjustable
foot
When the level meter is
inclined to rightward,turn the
left-foot right or turn right-foot
left
English-4
2.The entrance is at front of the
bottom part.
4.Lay down the
machine, fasten up two screws.
Level meter
balance
unbalance
adjustable
foot
When the level meter is
inclined to leftward,turn the
left-foot left or turn right-foot
right
washing
middling