Part 1 - About The Machine; General Precautions; The Machine’S Safety Devices - ICC RONER R PLUS Manual De Instrucciones

PART 1 - ABOUT THE MACHINE

1.1 - GENERAL PRECAUTIONS

-
The RONER must only ever be used by a trained operator who has read and un-
derstood the safety instructions in this manual.
-
In the case of shifts, make sure all the operators are suitably trained.
-
Do not touch the heating elements with bare hands.
-
Always unplug the machine before cleaning or maintenance.
-
Always take the residual risks into account when servicing or cleaning the machine
(and therefore when removing the protective devices).
-
Always focus on the work in hand when executing maintenance or cleaning.
-
Check the condition of the power cable on a regular basis; a worn or damaged
cable can pose serious electrical risks.
-
If there are any signs the machine is not working properly or you have reason to
believe it is malfunctioning, you are advised to not use it and to contact the Assis-
tance Centre immediately.
-
Do not execute any repairs directly. Always contact an authorized repairman.
The user must never, for any reason, tamper with the machine. Always contact the
Manufacturer in the event of a fault. Any attempt by the user or unauthorized op-
erator to dismantle, change or tamper with a component of the machine shall for-
feit the
Declaration of Conformity drawn up in accordance with EEC Directive 2006/42
and invalidate the warranty. The Manufacturer Firm cannot assume liability for
damage due to tampering.
Moreover, the Manufacturer cannot be held liable for:
-
Improper use or tampering with the machine by poorly trained operators;
-
Poor or insufficient maintenance;
-
Use of spare parts that are not original or type-approved;
-
Failure to comply with some or all of the instructions in this manual;
-
Treatment of the machine’s surfaces with unsuitable products.

1.2 - THE MACHINE’S SAFETY DEVICES

The electrical and mechanical safety devices conform to directives 2006/95 and
2006/42, and standard 60335-1.
The Roner protects against electrical and mechanical risks during operation as well as
cleaning and maintenance.
There are however some RESIDUAL RISKS that cannot be fully eliminated. These
are headed ATTENTION and concern the risk of burns or bruises when loading and
unloading the product and cleaning the machine.
4