Start-Up Procedure; Light Intensity Setting - SCHOTT KL 1600 LED Manual De Instrucciones

You can switch the KL 1600 LED on and off by pressing the main switch. If the
device is switched on, the green control lamp light up. To disconnect the
power supply, pull out the plug!
Adjust the light intensity by turning the light intensity control. The scale is
divided into six brightness levels, from 0 to 5.
Attention: The device is not switched off in the 0 control position, therefore the
green control lamp lights up. To switch off the KL 1600 LED, press the power
switch.

2.3 Start-up procedure

2.4 Light intensity setting

17
EN