Service And Maintenance - IPC FOX Manual De Instrucciones

6. Make sure that the air intake
on the hand tube is closed.
Suction
restored
3.3 Emptying of tank
Observe whether the tank needs to
be emptied by opening the buckles
(3) and remove the vacuum cleaner
head (1).
Emptying of tank
1. Find an appropriate waste bin
outside for disposal of the
tank
2. Open the buckles (3)
3. Remove the hose (10)
4. Take of the head (1) and put
it on the ground on the
appropriate feet.
5. Empty the tank (2) into the
bin
6. Put the head (1) on the tank
(2) and tighten the buckles
(3)
7. Clean the post-filter (see next
section)
3.4 Post-filter Cleaning
The post filter (6) ensures that very
fine dust not removed by the pre-
filter (11) is removed.
Post-filter cleaning
1. Move the latch (14) down and
take out the filter (6).
2. Clean the
outside
backwards through it and/or
move it rapidly up and down.
3. Insert the post-filter (6) into
the head (1). Ensure that it is
correctly fitted
performance
post-filter
by blowing
3.5 Adjust the suction power
is
The suction power is maximal with
the sliding
minimal when all open. Adjust the
suction power by putting the sliding
valve in the desired position.

4. Service and maintenance

• Store the machine indoors and in a
dry environment.
• Clean the machine surface with a
dry cloth or a damp cloth with a
little cleaning agent.
• Order original accessories from a
local dealer.
• Service
dealer.
4.1 Recycling and scrapping
Recycle the wrapping and scrap the
machine
recommendations from the local
authorities. Cut the cord as short as
possible to avoid someone getting
injured on the scrapped machine.
(6)
4.2 Environmental commitment
air
This machine is designed with the
environment in mind. All plastic
parts due marked for recycling.
21
valve is closed
– contact your
according
EN
and
local
to