Cool Mode - Haier QPSA13 Manual Del Propietario Y Instrucciones De Instalación

CONTROLS
The display will always default t o show t he room t emperat ure.
When t he air condit ioner is t urned on, it will aut omat ically st art in t he last mode and fan set t ings select ed.

Cool Mode

Use t he COOL mode for cooling.
To set t he COOL mode:
1. Press t he MODE pad unt il t he COOL indicat or light is lit .
2. Press t he FAN
speed.
3. Press + or - t o set t he desired t emperat ure bet ween 61°F
and 89°F in 1°F increment s.
Aft er set t ings have been made, t he display will change back
t o show t he room t emperat ure.
The t emperat ure cont rol is used t o maint ain t he room
t emperat ure. The compressor will cycle on and off t o keep
t he room at t he set level of comfort . Set t he t emperat ure
cont rol at a lower number and t he indoor air will become
cooler. Set t he t emperat ure cont rol at a higher number
DRY Mode—Dehumidificat ion
Use t he DRY mode t o provide dehumidificat ion only. The
fan will run at a fixed speed at t his set t ing, so a fan speed
cannot be set . Keep windows and doors closed for t he best
dehumidifying effect s.
To set t he DRY mode:
•Press t he MODE pad unt il t he DRY indicat or light is lit .
FAN Mode
Use t he FAN mode t o provide air circulat ion and filt ering
wit hout cooling.
To set t he FAN mode:
• Press t he FAN pad unt il t he desired indicat or light for high,
medium, or low fan speed is lit .
HEAT Mode
Use t he Heat mode at Low, Med, High or Aut o Fan Speed
for heat ing. Use t he Temperat ure Increase (+) / Decrease (- )
pads t o set t he desired t emperat ure bet ween 61°F and 86°F
in 1°F increment s.
Power Out age Recovery Feat ure
In t he case of a power out age or int errupt ion, t he unit will
aut omat ically re- st art in t he set t ings last used aft er t he
power is rest ored.
6
and t he indoor air will become warmer. NOTE:
condit ioner is off and is t hen t urned on while set t o COOL,
it will t ake approximat ely 3 minut es for t he compressor t o
st art and cooling t o begin.
Cooling Descript ions
For Normal Cooling —Select t he COOL mode and HIGH,
MEDIUM, or LOW fan speed wit h a middle set t emperat ure.
For Maximum Cooling —Select t he COOL mode
and HIGH fan speed wit h a lower set t emperat ure.
For Quiet er & Night t ime Cooling —Select t he COOL mode
and LOW fan speed wit h a middle set t emperat ure.
If you swit ch from COOL or DRY mode set t ing t o
OFF, wait 3 minut es before rest art ing.
show t he room t emperat ure.
NOTE:
set t ing, wait at least 3 minut es before swit ching back t o a
Since fan only set t ings do not provide cooling, a set
been set , t he display will change back t o show t he room
t emperat ure.
The exhaust hose and window kit do not need t o be inst alled
when operat ing in fan mode."
An elect ronic t hermost at is used t o maint ain t he room
t emperat ure. The heat er will cycle on and off t o keep t he
room at t he set level of comfort .
NOTE: If t he TIMER was set before t he power out age, it will
need t o be reset aft er power is rest ored.
49- 5000467 Rev. 1