Product Features - AEMC Instruments 6240 Manual De Instrucciones

The pistol-grip spring loaded 25 A test probes can measure low resistances very
accurately using micro-ohmmeters with (.157 to .236) in (4 to 6) mm diameter
binding posts or .157 in (4 mm) diameter safety terminals.
■ The pistol-grip spring loaded test probes ensure good contact at the
measurement point even if the surface is uneven.
■ Each 25 A test probe has very low resistance.
■ The measurement is made in 4-wire mode, so lead resistance compensation
is not necessary.
NOTE: At the other end of the leads, there are .157 in (4 mm) diameter
safety terminals that spaded lugs .236 in (6 mm) diameter screw into.
These probes can be used with micro-ohmmeters having either
binding posts from (.157 to .236) in (4 to 6) mm in diameter or safety
terminals .157 in (4 mm) in diameter.
Spring Loaded 25A Test Probes

2. PRODUCT FEATURES

7