Introduction - AEMC Instruments 6240 Manual De Instrucciones

Thank you for purchasing our Spring Loaded 25 A Test Probe. This test probe
is designed for use with AEMC
6255 or equivalent.
For best results from your instrument and for your safety, read the enclosed
operating instructions carefully and comply with the precautions for use. Only
qualified and trained operators should use this product.
Symbols
This symbol signifies CAUTION! and indicates that the user must
refer to the user manual before using the instrument
This product complies with the Low Voltage & Electromagnetic
Compatibility European directives (73/23/CEE & 89/336/CEE)
In the European Union, this product is subject to a separate
collection system for recycling electrical and electronic components
in accordance with directive WEEE 2002/96/EC
Indicates important information to acknowledge
Definition of Measurement Categories (CAT)
CAT IV corresponds to measurements taken at the source of low-voltage
installations.
Example: power feeders, counters, and protection devices.
CAT III corresponds to measurements taken in building installations at the
distribution level.
Example: distribution panel, circuit-breakers, machines, and fixed industrial
devices.
CAT II corresponds to measurements taken on circuits directly connected to low-
voltage installations.
Example: power supply to domestic electrical appliances and portable tools.
Spring Loaded 25A Test Probes

1. INTRODUCTION

Instruments Micro-ohmmeters Model 6240 and
®
5