Use only factory specified replacement parts. AEMC
responsible for any accident, incident, or malfunction following a repair completed
other than by its service center or by an approved repair center.
5.1 CLEANING
Disconnect the accessory completely.
Use a soft cloth lightly dampened with soapy water. Rinse with a wet cloth and
then dry with a dry cloth. Do not use alcohol, solvents, or hydrocarbons.
5.2 REPAIR AND CALIBRATION
To ensure that your instrument meets factory specifications, we recommend
that it be scheduled back to our factory Service Center at one-year intervals for
recalibration or as required by other standards or internal procedures.
For instrument repair and calibration:
You must contact our Service Center for a Customer Service Authorization
Number (CSA#). This will ensure that when your instrument arrives, it will be
tracked and processed promptly. Please write the CSA# on the outside of the
shipping container. If the instrument is returned for calibration, we need to know
if you want a standard calibration or a calibration traceable to N.I.S.T. (includes
calibration certificate plus recorded calibration data).
Ship To: Chauvin Arnoux
15 Faraday Drive
Dover, NH 03820 USA
Phone: (800) 945-2362 (Ext. 360)
Fax:
E-mail:
(Or contact your authorized distributor)
Costs for repair, standard calibration, and calibration traceable to N.I.S.T. are
available.
NOTE: You must obtain a CSA# before returning any instrument.
5.3 TECHNICAL AND SALES ASSISTANCE
If you are experiencing any technical problems or require any assistance with the
proper operation or application of your instrument, please call, mail, fax, or e-mail
our technical support team:
Chauvin Arnoux
Phone: (800) 343-1391 (Ext. 351)
Fax:
E-mail:
www.aemc.com
Spring Loaded 25A Test Probes
5. MAINTENANCE
, Inc. d.b.a. AEMC
®
(603) 749-6434 (Ext. 360)
(603) 742-2346 or (603) 749-6309
, Inc. d.b.a. AEMC
®
(603) 742-2346
Instruments will not be held
®
Instruments
®
Instruments
®
11