Package Contents And Assembly - Ducati E-MOTO KIDS Manual De Instrucciones

Model Reference picture
E-Moto Kids

2. Package contents and assembly

In the package
- no.1 handlebar plate
- no.4 handlebar plate screws
- no.2 platforms
- no.4 plastic covers
- no.3 Allen keys
- no.2 fixed wrenches
- no.4 platform retaining
screws
- no.2 cover retaining screws
- no.1 battery charger
07
Indications
1. Front wheel installation:
Quick release lever
Install the wheel on the front
fork in the direction of the arrow.
After installing the front wheel,
rotate the quick release lever
clockwise as required and finally
bend it inwards to lock it.
2. Handlebar installation:
As shown in the figure, use
the Allen key to tighten the
handlebar attachment plate with
the four screws and the washers
and respect the tightening
torque of 9Nm.
3. Platforms installation:
Approach on the left side the
platform with stand included,
aligning it with the respective
holes located on the frame,
insert the two screws and
tighten them (see image).