Makita XML12 Manual De Instrucciones página 14

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

4.
Loosen the thumb nuts of the handle, and then
fold the upper handle.
1
Fig.28
► 1. Thumb nut 2. Upper handle
5.
Place the machine in the upright position.
NOTE: When putting the mower in the upright posi-
tion, do not hold the handle only, but hold the mower
body and handle.
6.
Store the grass basket between the handle and
the mower body.
Fig.29
► 1. Grass basket
Carrying the mower
CAUTION:
Before carrying the mower, make
sure that the battery pack and lock key are
removed.
When carrying the mower, hold the rear grip and the lower
holding part at the front of the machine as shown in the figure.
1
Fig.30
► 1. Lower holding part 2. Rear grip
Removing or installing the mower
blade
2
battery pack when removing or installing the
blade. Failure to remove the lock key and battery
pack may cause a serious injury.
onds after releasing the switch. Do not start any
operation until the blade comes to a complete
stop.
dling the blade.
Removing the mower blade
1.
height adjusting lever comes to the upper side.
2.
similar tool into a hole on the mower body.
3.
1
Fig.31
► 1. Mower blade 2. Wrench 3. Screwdriver 4. Hole
4.
2
Fig.32
► 1. Blade support 2. Mower blade 3. Bolt
14 ENGLISH
WARNING:
Always remove the lock key and
WARNING:
The blade coasts for a few sec-
WARNING:
Always wear gloves when han-
Put the mower on its side so that the mowing
To lock the blade rotation, insert a screwdriver or a
Turn the bolt counterclockwise with the wrench.
1
Remove the bolt and blade in order.
2
3
4
1
2
3
Tabla de contenido
loading

Tabla de contenido