Basic Operations; Turning On The Power - JVC KD-DV5000 Manual De Instrucciones

BASIC OPERATIONS

2

Turning on the power

1
Turn on the power.
ATT
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
Each time you press the button,
SRC
the source changes as follows.
TUNER
To operate the tuner (FM or AM),
see pages 11 – 15.
To play a disc,
see pages 16 – 46.
To operate the CD changer,
see pages 59 – 64.
To operate the external component
(LINE IN), see page 65.
1
* If a disc is not in the loading slot, you cannot
select "DISC" as the source to play.
2
*
Without connecting a CD changer, you cannot
select it as the source to play.
* 3
To select "LINE IN, " select "Line In" for the
"Ext Input" setting on page 53.
8
SRC
ATT
1
SEL
1, 3
* 1 * 2
CD-CH or LINE IN
DISC
(CD changer)
2 3 4 5 6
3
Adjust the volume.
ATT
Current sound (iEQ) mode (see page 48)
4
Adjust the sound as you want. (See
pages 47 – 49.)
Note:
3
*
While playing a source, you can also show the level
meter on the display. For details, see "Activating the
level meter" on page 10.
To drop the volume in a moment
Press
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial, you can also restore
the sound.
To turn off the power
Press
• If you turn off the power while listening to a
disc, playback will start from where playback
has been stopped previously, next time you
turn on the power.
MODE
DISP
M EQ
D
Volume level appears.
briefly while listening to any
for more than 1 second.