c.
Disconnect the plug from the power source before making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e.
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tools operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
f.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g.
Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the
manner intended for the particular type of power tool, taking into account the working conditions and
the work to be performed. Use of the power tool for operations different from intended could result in a
hazardous situation.
5. Service
a.
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Specific Safety Rules
Only use blades in perfect condition.
Keep the shoe flat on the work piece.
Do not put pressure on the saw so that it will slow down.
Always switch off before you put the jig saw down.
Disconnect the saw from the power supply when it is not in use, before cleaning and changing saw blades.
The unit should only be used as a hand-held tool and must never be fixed in an inverted position for use as a
bench saw.
Advice to wear a dust mask.
Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the operator an electric shock.
Environmental protection
CAUTION! This product has been marked with a symbol relating to removing electric and
electronic waste. This means that this product shall not be discarded with household waste but
that it shall be returned to a collection system which conforms to the European WEEE Directive.
Contact your local authorities or stocks for advice on recycling. It will then be recycled or
dismantled in order to reduce the impact on the environment. Electric and electronic
equipment can be hazardous for the environment and for human health since they contain
hazardous substances.
Tool specifications
techniCAL cHaractEristiCs
Rated voltage
No load speed
Max. Cutting depth Lumber
Speed Adjusting Range
Weight
LpA (Sound pressure level)
LwA (Sound power level)
Vibration level
Protection class
120Vac/60Hz (6.7A)
0-3000 min-¹
Lumber : 100mm
800~3000 / min
2.0 kg
83,89 dB(A) KPA=3dB(A)
94,89 dB(A) KWA=3dB(A)
13.621 m/s² K=1.5 m/s²
II
02
Metal : 10 mm