Troubleshooting - cecotec CONGA 999 VITAL X Manual De Instrucciones

ENGLISH

5. TROUBLESHOOTING

Robot signal
1 beep
2 beeps
Steady red
light
4 beeps
1 beep
Oscillating
red light
2 beeps
3 beeps
4 beeps
40
Cause Solution
Remove the wheel, clean it and once it is
Omnidirectional placed again, press the power button to
wheel error restart the robot vacuum cleaner.
Side brush error Clean the side brushes and press the power
button to restart the robot.
Main brush error Remove and clean the main brush. Once it
is placed again, press the power button to
restart the robot vacuum cleaner.
Incorrectly Check the tank connection.
connected tank
Bumper error Check if the bumper is blocked and press on
both sides and center to unblock it.
Free-fall sensor error Check if the robot is placed on an uneven
surface, if its wheels are off the ground or
if it is stuck in a dark place and move it to a
new location. Otherwise, clean the free-fall
sensor.
Check the battery is properly assembled, as
Battery error indicated in the manual.