Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ð The minutes field and the
bol flash on the timer/duration
display.
4. Set the minute by turning the oven con-
trol knob to right/left. Approve the set-
ting by pushing the oven control knob
once or touching the
ð The time of day is set and the
symbol illuminates continuously.
Connecting the oven to the wireless net-
work and introducing it to the "Home-
Whiz" application
You may connect your oven to the wireless
network and control it through the "Home-
Whiz" application with a smart device. For
this purpose, install the "HomeWhiz" ap-
plication to your smart device first. The
"HomeWhiz" application is available on IOS
and Android mobile operating systems.
After downloading the "HomeWhiz"
application, follow the instructions
on the application to create your
home.
You may complete the procedure
to connect your oven to a wireless
network and to activate the remote
control of the oven by following the
instructions provided on the ap-
plication.
1. To switch the oven to setup mode,
touch the
and
for about 3 seconds when the oven is in
off mode (time of day is shown on the
display).
sym-
key once.
keys simultaneously
ð When the oven switches to the
setup mode, an animation is dis-
played on the display where some
lines flash.
2. Open the "HomeWhiz" application you
have installed on your smart device.
After creating your home, select the
oven under kitchen appliances and
enter the stock number of your product
to the application and follow the steps
described on the application.
The stock number of your product
is the number starting with "77..."
located at the bottom of the front
cover of the manual.
3. Complete the introduction of your oven
to the application by following the in-
structions provided on the application.
Activating the remote control of the oven
After introducing your oven to the "Home-
Whiz" application, to allow remote control:
1. Touch the
symbol is shown on the display.
ð On the display, the
displayed with the
gether.
EN / 34
key once while the
symbol shall be
symbol to-
Tabla de contenido
Solución de problemas
