Beko BBIS13400XMSWAE Manual Del Usuario página 31

Deactivating the key lock
1. Touch the key until the
pears on the timer/duration display.
ð A countdown of 3-2-1 appears on the
display. When the countdown is over,
the symbol disappears on the timer/
duration display and the key lock is
deactivated.
Setting the alarm
You can also use the control unit of the
product for any warning or reminder other
than baking. The alarm clock has no effect
on the oven operating functions. It is used
for warning purposes. For example, you
can use the alarm clock when you want to
turn the food in the oven at a certain time.
As soon as the time you set has expired,
the timer gives you an audible warning.
The maximum alarm time may be
23 hours 59 minutes.
1. Touch the key once to set the alarm
period.
ð The minute field and
start to flash on the timer/duration
display.
2. First set the minutes by turning the
oven control knob to the right/left and
activate the timer field by touching the
key once.
3. Adjust the time by turning the oven
control knob to the right/left. Touch the
key again to confirm the setting.
symbol ap-
4. After the alarm time is completed, the
symbol starts flashing and gives you an
audible warning.
Turning off the alarm
1. At the end of the alarm period, the
warning sounds for one minute. Touch
any key to stop the audible warning.
ð The audible warning is stopped.
symbol
If you want to cancel the alarm;
1. Touch the
alarm period.
2. Turn the oven control knob to the right/
left until the alarm time reaches
"00:00".
Setting the volume
You may set the volume of your control
unit. Your oven should be turned off to per-
form this setting.
1. With the oven turned off (while the time
of day appears on the display), touch
the
ate the settings menu.
EN / 31
ð On the timer/duration display, the
symbol lights up continuously
and the alarm time starts to count
down on the display.
If the alarm time and baking time
are set at the same time, the
shorter time is shown on the timer/
duration display.
key once to reset the
ð The symbol starts to flash on
the timer/duration display.
key for about 3 seconds to activ-
ð A countdown of 3-2-1 appears on
the display. When the countdown
is over, the settings menu is activ-
ated.
EN
ES