Maintenance; Accessories; Technical Specifications - Senco DURASPIN DS530 Serie Manual Del Usuario

Maintenance

Read section titled "Safety Warnings" before maintaining tool.
1. With battery removed or cord disconnected, make daily inspection to ensure free movement of
nosepiece and trigger.
Do not use tool if nosepiece or trigger sticks or binds.
2. lubrication of the feed system is not necessary. DO NOT OIl.
3. Wipe tool clean daily and inspect for wear, especially the bit and nosepiece. Replace as necessary.
WARNING
Repairs other than those described here should be performed only by trained,
qualified personnel. Contact SENCO for information at 1-800-543-4596.

Accessories

SENCO offers a full line of DuraSpin screws and accessories for your SENCO tools, including:
• bits
• Storage bag
• Assorted Nosepieces
• Safety Glasses
For more information or a fully illustrated catalogue of Senco accessories, contact your sales
representative or call Senco at 1-800-543-4596.

Technical Specifications

SPECIFICATION
WEIGHT
HEIGHT
LENGTH
WIDTH
FASTENER CAPACITY
FASTENER LENGTH
FASTENER RANGE
DS530
1.65 LBS. (.75 KG)
3.5" (89 MM)
22" (556 MM) MAX
2.75" (70 MM)
50 SCREWS (1 STRIP)
1-3"
#6-#12
DS530-S1/DS530-D1/
DS530-M1
3.5 LBS. (1.6 KG)
3.5" (89 MM)
33" (838 MM) MAX
2.75" (70 MM)
50 SCREWS (1 STRIP)
1-3"
#6-#12
12
DS532/DS534
7 LBS. (3.2 KG)
7" (178 MM)
40.5" (1029 MM) MAX
2.75" (70 MM)
50 SCREWS (1 STRIP)
1-3"
#6-#12