4. Operation
Warning – Connection of devices
• Before connecting a device, check whether it
can be adequately supplied with the charger's
current delivery.
• Ensure that the total output of all the
connected devices does not exceed 65 W.
• Note the instructions in your device's operating
manual.
Note - Power Delivery
• Plug & GO: no additional software required,
simply plug in and start:
Thanks to Power Delivery, the voltage and
power are adjusted automatically.
• Be aware that, for efficient and optimised
charging, your terminal device must support
the PD (Power Delivery) function.
• If you have a large number of PD-enabled
devices with different firmware updates, it may
be that the function is not fully supported.
Unless different instructions have been expressly
given in the operating instructions for the devices
you are charging, proceed as follows:
• Connect your device to a USB charging port using
a suitable USB cable.
• Connect the charger to a properly installed and
easily accessible mains socket.
• The charging process is displayed on your device.
• Disconnect the device from the charger if you
wish to interrupt the charging process or when
the device is fully charged.
• Then disconnect the charger from the line
connection.
5. Care and maintenance
Note
Disconnect the device from the mains before
cleaning and during prolonged periods of
non-use.
• Only clean this product with a slightly damp,
lint-free cloth and do not use aggressive cleaning
agents.
• Ensure that no water is able to enter the product.
6. Warranty disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failure to observe the operating
instructions and/or safety notes.
7. Technical data
Mains connection
Connected load
Specifications according to
Regulation (EU) 2019/1782
Brand name,
commercial register
number, address
Model identifier
Input voltage
Input AC frequency
Output voltage /
output current /
power output
Average efficiency
during operation
Efficiency at low
load (10%)
Power consumption
at zero load
250 V ~ / 16 A
max. 3680 W
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim, Germany
00223188 / 00223189
230 V
50 Hz
1. Typ-C1: 5,0-20,0V DC
3,0A-3,25A 15,0-65,0W
2. Typ-C2: 5,0-20,0V DC
3,0A-3,25A 15,0-65,0W
3. USB A: 5,0-9,0V DC 2,0-
3,0A 15,0-18,0W
4. Typ-C1 + Typ-C2:
Typ-C1 5,0-20,0V DC
2,25-3,0A 15,0W-45W
Typ-C2 5,0-20V DC
1,0A-3,0A 15,0W-20,0W
5. Typ-C1 + USB A:
Typ-C1 5,0-20,0V DC
2,25-3,0A 15,0W-45W
USB A 5,0-9,0V DC 2,0-3,0A
15,0-18,0W
6. TYP-C2 + USB A:
5,0V DC 3,0A 15,0W total
7. Typ-C1 + Typ-C2 + USB A
Typ-C1 5,0-20,0V DC
2,25-3,0A 15,0W-45W
TYP-C2 + USB A
5,0V DC 3,0A 15,0W total
Total Output max. 65,0W
86,0 %
75,7 %
0,30 W
3