Tabla de contenido
Idiomas disponibles
Idiomas disponibles
MASTER SLAVE CONTROL
The master-slave function allows several lights to operate in synchronization (same color and same move-
ments) without the need of a DMX controller.
Cascade the PAR-192WAL you want to use.
-
-
Select the slave mode (A001) on every light except the one you want to be the master ("MASTER"). These
lights are referred to as slave lights (SLAVE.
-
At the MASTER light select any of the operating modes other than DMX control.
SECURITY RECOMMENDATIONS
-
Do not under any circumstances access the internal parts of the device.
-
Make sure that the device is at least 50 cm away from flammable substances or elements.
-
Looking at the rays from any distance less that 15 cm can cause serious damage to the eyes, as can
direct exposure to radiation for more than 10 seconds.
-
Continuously switching the unit on and off will result in a decreased life span of the unit.
-
These devices should only be used in areas that are refrigerated and under cover.
-
Do not move or handle the appliance while it is connected to the mains and in operation.
-
Do not modify the lighting elements of the device without technical supervision or with any materials that
are not approved by the supplier.
TECHNICAL SPECIFICATIONS
CHARACTERISTICS
LED
DMX CHANNELS
INPUTS
OUTPUTS
CONTROLS
PROTECTION
POWER SUPPLY
DIMENSIONS
ACCESSORIES
PAR-192WAL
Flat PAR RGBW spotlight.
Outdoor use, IP-65 protection.
Operation in automatic, manual (colour and strobe adjustment), sound
activation, DMX control, master/slave mode.
Colour, strobe and operation mode selection via built-in display.
Colour, dimmer, strobe and transition speed adjustment via DMX controller.
Extra-flat design and sturdy aluminium housing.
Double-arch mounting bracket for floor placement or overhead anchorage.
Ideal for small-medium stages, halls and events.
Installation can be extended with cascade connection.
Built-in microphone.
18 x 10 W, LED RGBW (4 en 1)
4 or 8, selectable
DMX IN, 3 pin XLR, waterproof cable, 1 m
DMX OUT, 3 pin XLR, waterproof cable
POWER OUT, 4 A maximum, waterproof cable, 1 m
Configuration screen
IP-65
100-240 V AC, 180 W
290 x 220 x 140 mm depth
Double-arch mounting bracket for placement on the floor, or overhead
anchorage.
- 5 -
EN
Tabla de contenido
