ARVA NEO BT PRO Guía De Utilización página 14

to the slope. Move out gradually in a spiral from the minimum
distance point detected by your transceiver.
STANDBY mode:
We recommend switching your device
to standby mode while you are prob-
ing-shoveling. This mode is a neutral
position (pause) in which the device is
neither in search mode nor in transmit
mode, allowing the rescuer to concen-
trate fully on extricating the burial. In
STANDBY mode, the device stays on,
ensuring the rescuer can activate au-
tomatic revert-to-transmit mode if necessary. Standby mode
can be activated from search mode by pressing and holding
14
the "-" button. Press and hold the "-" button again to exit
STANDBY mode.
Shoveling takes at least as long as searching with the
transceiver. A methodical approach to the shoveling phase
is essential. Using the V-shaped conveyor technique is the
most effective way of shoveling and clearing. You must turn
off the burial victim's transceiver as soon as they are un-
covered.
5/ INTERFERENCE
Some electronic devices and electrical and electromagnetic
installations can interfere significantly with the operation of
transceivers. These sources can be:
• Embedded: smartphone, digital radio, camera, heart rate
monitor, GPS
EN