ARVA NEO BT PRO Guía De Utilización página 12

3.2.3/ STEP 3: FINE SEARCH
When the screen indicates you are 3 m from the burial(s) lo-
cation (or 5 m depending on the settings), your device will
no longer give any direction, and you will begin the cross-
search phase. Move your device in a criss-cross pattern until
it is vertically above the point where the distance reading is
lowest.
Marking function: when you are less than 3 m distance from
the burial(s) location (or 5 m depending on the setting), the
MARKING pictogram blinks at the top right-hand side of the
screen. Press the marking button to mark the burial. The
12
device then searches for the next bur-
ial without returning to the previously marked burial(s). When you mark a
burial, a flag appears next to their pic-
togram.
3.3/ ANALOG SEARCH MODE
It may be more useful to switch your device to analog search
mode in some situations. You can activate the analog search
mode from the search mode by briefly pressing the "+" and
"-" buttons simultaneously using your left and right thumbs
(repeat the operation to return to the digital search mode).
By default, in analog mode, sensitivity calibration is per-
formed automatically. To switch to
manual mode, press either the "+" or "-"
button and then adjust the sensitivity
according to your progress using the
same buttons.
The left and right arrows blink alternate-
EN