ASSEMBLY & INSTALLATION
BEFORE USING YOUR APPLIANCE
Before connecting the appliance to a power source, let it stand upright for
approximately 24 hours. This will reduce the possibility of a malfunction in the
cooling system from handling during transportation.
Before operating your fridge for the first time, follow these steps:
• Remove the exterior and interior packing.
• Clean the interior surface of the unit with lukewarm water and a soft cloth.
• Place the fridge on a level surface that will be strong enough to support
the unit when it is fully loaded. To level your cooler, adjust the front feet
located at the bottom of the unit.
REVERSING THE DOOR SWING
The door hinge is on the left side by default. If you wish to reverse the swing so
that the door opens from the right, it is important to have at least one other
person to help. It is dangerous to try to reverse the door swing by yourself.
1.
Unscrew the upper door hinge while the second person supports the door.
2.
Remove the upper hinge and carefully lift the door off the bottom hinge.
3.
Unscrew the bottom hinge and install it on the left side of the unit.
4.
Flip the door around so that the handle is on the right side and slip the
door over the bottom hinge.
5.
Reattach the door by screwing the top hinge into the holes provided on
the upper left surface of the unit. Make adjustments as necessary to be
sure the door is aligned properly.
INSTALLING YOUR SPLITSHELF™
The top zone of the fridge comes with an adjustable SplitShelf™ configuration
for your beverages, enabling you to have either a full-sized shelf or a half-sized
shelf to accommodate different sized cans or bottles.
To install, simply remove the first shelf from the top zone of the fridge and
replace with the included half-sized shelf.
www.newair.com
EN
10