Bluetooth Connection; Usb Connection; Aux Connection - Motorola ROKR 800 Guia De Inicio Rapido

4. Power on/Power off/Charging
1. Connect one end of the charging cable to the speaker's DC jack and the other end to an
external DC 5V/2A power source. It takes about 2-3 hours to fully charge the speaker.
2. Press and hold
3. Press and hold
4. You can use this speaker as a battery charger for your rechargeable USB devices. Connect
your USB device to the USB port on the rear of this speaker. It should be noted that
the speaker will enter sleep mode after 15 minutes of inactivity and the charging will be
stopped.
The speaker is operated by connecting it to the built-in rechargeable battery. After the speaker
is powered on, the battery level will be shown on the LED display and you can check the status
on the display.
Note
The speaker will enter sleep mode after 15 minutes of inactivity.
If the speaker is powered by the battery, it will automatically power off if no action is
•
performed for 15 minutes.
If the speaker is powered by the AC or DC power source, it will enter standby (off) mode if
•
no action is performed for 15 minutes.
5.

Bluetooth Connection

You can use your speaker "ROKR 800" as an external speaker for your Bluetooth enabled
smartphone or tablet.
1. Press or to enter Bluetooth mode. To remove and forget the previous connections,
press and hold .
2. Choose "ROKR 800" on your mobile device to connect to the speaker.
3. Once a successful connection is established, you can start streaming audio from your
Bluetooth device to this speaker.
6.

USB Connection

With your speaker, you can enjoy music stored in a USB storage device such as an MP3
player. Connect your USB storage device to the USB port of your speaker. Music will play
automatically. Otherwise, press
the USB device contains playable audio contents.
7. FM Radio
1. Press to select FM radio mode.
2. Auto tuning: Press and hold
starts to change, then release the button. The speaker will search and store the stations. A
maximum of 30 stations can be stored.
3. Manual tuning: Press
4. Select the stored stations: Press
then press /
8.

AUX Connection

1. Press to select AUX mode.
2. Connect one end of a 3.5mm audio cable to the headphone or audio line-out socket of your
audio device and the other end to the AUX in jack of this speaker.
3. Turn on your audio device and audio starts playing from the device.
9. EQ mode and Bass Boost
1. Press EQ to scroll through five different EQ settings: Flat > Rock > Jazz > Classic > Pop.
2. Press to get the super bass sound.
3. If Mic 1/Mic 2 is connected to the microphone, the EQ setting will turn off. Press EQ and the
display will show: VOCA, DUCI, EqOF.
for 3 seconds to power on the speaker.
for 3 seconds to power off the speaker.
to select USB mode and press
on the speaker for 3 seconds until the frequency indication
/ to manually select the desired FM frequency.
, the display will show the number of the stored stations,
to select the number of the station.
on the speaker. Make sure
3