Mafell MT55 18M bl Instrucciones De Funcionamiento Y Seguridad página 24

In addition, some rails available on the market may also be used. To do this, remove the insert on the bottom
of the machine.
Use the following procedure to remove the insert:
1. Loosen the screws (25) at the insert (26).
2. Pull out the insert (26).
➢ The groove that appears now is used to
set the machine on other guide rails.
Insert removed.
✓
5.9.2 Pre-scoring with the guide rail
To avoid tearing the surface of panel materials, use the pre-scoring function of the machine
when you work with guide rails. Here, the cutting depth is limited to 2.5 mm [0.1 in] and the
saw blade is minimally offset from the cutting line.
Use the following procedure to use the pre-
scoring function of the machine:
1. Secure a guide rail on the workpiece.
2. Position the machine with the guiding groove on
the guide rail.
3. Rotate the notch for pre-scoring (3) clockwise
until it hits the stop.
The pre-scoring depth is now set to 2.5
➢
mm [0.1 in]
4. Pre-score the plate.
5. Rotate the notch for pre-scoring (3)
counterclockwise.
➢ The workpiece can now be cut at the full
cutting depth.
Pre-scoring function of the machine used
✓
24
Fig. 25: Removing the insert for third-party rail
Fig. 26: Activating the pre-scoring function
Fig. 27: Deactivating the pre-scoring function
MT55 18M bl
01/2022