Chicco ONE4EVER Manual De Instrucciones página 7

INSTRUCTIONS
FOR USE
ONE4EVER STROLLER
ADAPTORS
IMPORTANT – READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE.
WARNING: BEFORE USE, REMOVE AND
DISPOSE OF ALL PLASTIC BAGS AND
PACKAGING MATERIALS AND KEEP THEM
OUT OF REACH OF CHILDREN.
WARNINGS
• WARNING: The adaptors can only be used
with the One4Ever stroller.
• WARNING: Only CHICCO KAILY, KIROS I-SIZE
FAST IN/KIROS EVO I-SIZE FAST IN car seats
or the BEST FRIEND LIGHT carrycot can be
installed on these adaptors.
• WARNING: Before use, check correct fixing
of the adaptors to the frame of the stroller.
• WARNING: Before use, make sure that the
child car seat or carrycot is correctly fitted on
the adaptors by pulling up on the car seat or
carrycot.
• Keep adaptors out of reach of children when
they are not in use.
ADVICE FOR
MAINTENANCE
Cleaning and maintenance operations must
only be carried out by an adult.
CLEANING
After possible contact with water, dry the metal
parts in order to avoid the formation of rust. Do
not use solvents or abrasive products to clean
the plastic components. After use, keep the
adaptor in a dry place.
INSTALLATION AND USE OF ADAPTORS
WITH THE CHICCO KAILY CHILD CAR SEAT
Before installing the adaptors on the stroller,
the stroller seat must be removed.
FAST-IN
CLEANING AND
1. Position the adaptors on the frame of the
stroller by inserting the plastic component
into the joint on the stroller (Fig. 1). Once the
two adaptors have been properly mounted
on either side, the stroller is ready to be at-
tached to the child car seat (Fig. 1A).
2. To install the CHICCO KAILY car seat insert
the car seat's lateral connectors into the pre-
viously mounted adaptors (Fig. 2-2A).
WARNING: The car seat should be fixed only
and exclusively facing parent.
3. To remove the Car Seat press the button on
the back of the car seat and pull upwards us-
ing the handle on the Car Seat (Fig. 3).
INSTALLATION AND USE OF ADAPTORS
WITH THE CHICCO KIROS I-SIZE FAST IN/
KIROS EVO I-SIZE FAST IN CHILD CAR SEAT
Connect the adaptors to the frame of the
stroller as described in Point 1.
4. To install the CHICCO KIROS I-SIZE FAST IN/
KIROS EVO I-SIZE FAST IN car seat insert the
car seat's lateral connectors into the previ-
ously mounted adaptors (Fig. 4-4A).
WARNING: The car seat should be fixed only
and exclusively facing parent.
5. To remove the CHICCO KIROS I-SIZE FAST IN/
KIROS EVO I-SIZE FAST INCar Seat, press the
buttons under the handle on both sides and
pull upwards on the handle (Fig. 5).
INSTALLING AND USING ADAPTORS WITH
THE BEST FRIEND LIGHT CARRYCOT
Connect the adaptors to the frame of the
stroller as described in Point 1.
6. Insert the lateral connectors of the carrycot
into the previously mounted adaptors (Fig.
6-6A).
WARNING: The carrycot must only be mount-
ed so that it faces the parent.
7. To remove the carrycot press the button lo-
cated in the foot area and pull upwards on
the handle of the carrycot (Fig. 7).
DISASSEMBLING THE ADAPTORS
The stroller can be closed with the adaptors
installed on the frame.
8. To remove the adaptors press the button
and pull up (Fig. 8).
7