Eldom press DA36 Manual De Instrucciones página 11

OVERVIEW
1.
Spray nozzle
2. Water inlet
3. Steam intensity regulator
4.
Steam burst button
5. Spray button
6. Handle
7.
Power cord
8. Base
9. Indicator lamp
10. Thermostat knob
11. Water tank
12. SELF CLEAN
13. Soleplate
SPECIFICATION
- Power: 2200 W
- Power supply: 220-240V ~ 50-60Hz
USE
Before the first switching on of the iron, fully unroll the power cord (7). During the initial use of the iron, harmless
odour may be emitted. This is short-lasting and has no effect on the operation.
Match the ironing temperature to the type of the fabric. If the type of the fabric is not known, start ironing with the
lowest temperature and increase it gradually to achieve positive results.
USING THE APPLIANCE
The iron must be used and placed on a stable surface.
TEMPERATURE SELECTION
Always refer to the garment manufacturer's recommendations for the correct temperature setting.
Before ironing, always look at the label on your clothing and follow the recommendations on it.
If there are no care instructions on the garment, you can follow the instructions in the table below.
If the type of the fabric is unknown, start with the lowest temperature and increase it gradually until a satisfactory
result is reached.
If the garment is composed of different materials, select the lowest recommended temperature.
acetate, nylon
silk, wool, polyester
cotton, linen
OPERATING INSTRUCTION
3
2
1
MATERIAL
STEAM IRON DA36
6
5
4
10
11
12
13
THERMOSTAT
POSITION
o
oo
ooo
EN
7
8
9
11