Charging With The Power Cord - Philips NORELCO 6000 Serie Manual De Instrucciones

12
English

Charging with the power cord

Quick Charge: After approx. 5 minutes of
charging, the battery contains enough energy for
one full shave.
When the product is fully charged it has a
cordless operating time of up to 60 minutes.
Note: You cannot use the product while it is
charging.
1 Make sure that the product is switched off.
2 Insert the small plug into the product and put
the power plug in the power outlet.
- While the product is in quick charge mode,
the lights of the battery status indicator
light up one after the other. After
approximately 5 minutes, the bottom light
of the battery status indicator flashes. The
battery now contains enough energy for
one full shave.
- While the product charges, first the bottom
light of the battery status indicator flashes
and then lights up continuously. Next the
second light flashes and then lights up
continuously, and so on until the product is
fully charged.
- When the product is fully charged, all three
battery status indicator lights light up
continuously. After approx. 30 minutes, the
light goes out automatically.
3 After charging, remove the power plug from
the power outlet and pull the small plug out
of the product.