Cleaning The Appliance - DrBrowns AC178-INTL Instrucciones De Uso

Note: If there is not enough water added, incomplete sterilization may occur� If the unit
was not able to sterilize completely, it will beep and the indicator light will flash for one hour�
If this happens, wait 10 minutes to allow unit to cool, then add water to the solid FILL LINE
of the measuring cup (110 mL), pour the water onto the heating plate and restart the
sterilization cycle�
Dry Only
Press the Dry Only Button� The appliance will beep one time and the drying cycle
A
will start�
When the drying cycle is complete, the appliance will beep 5 times and
B
switch off automatically� This cycle lasts approximately 45 minutes�
Note: Any cycle can be stopped at any time by pressing the power button�
CAUTION: If it is necessary to drain water from the base, always
POUR AWAY FROM YOU, as shown by the symbol on base�

CLEANING THE APPLIANCE

CAUTION: Unplug from outlet and allow to cool for 60 minutes before
cleaning� DO NOT IMMERSE IN WATER�
Clean at least once a week when in regular use�
BASE AND HEATING PLATE: Wipe all surfaces with a damp cloth or sponge�
TRAY, LID, LOWER RACK AND MEASURING CUP: Clean in hot, soapy water and rinse
well, or in a dishwasher (top rack only)� Allow to air dry�
Note: DO NOT use scouring pads, abrasives, bleach or solvents for cleaning�
DO NOT disassemble base� There are no serviceable parts inside�
5