Protecting The Environment; Technical Data - Stanley FATMAX FMEH750 Traducción De Las Instrucciones Originales

Maintenance
Your Stanley Fat Max corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
u
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
u
switch off.
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
@
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth
terminal. Follow the fitting instructions supplied with
good quality plugs. Recommended fuse: 5 A.

Protecting the environment

Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at www.2helpU.com

Technical data

Input voltage V
AC
No-load speed min
-1
Impact rate min
-1
Weight kg
Max. drilling capacity
Concrete
mm
Steel mm
Wood mm
(Original instructions)
Sound pressure (L
Sound power (L
Vibration total values (triax vector sum) according to EN 62841:
Impact drilling into concrete (a
Drilling into metal (a
The Supply of Machinery (Safety)
Stanley Fat Max declares that these products described under
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
For more information, please contact Stanley Fat Max at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
cal file and makes this declaration on behalf of
FMEH750
230
0 ~ 3200
0 ~ 54400
1.95
16
13
32
Level of sound pressure according to EN 62841:
) 101 dB(A), uncertainty (K) 5 dB(A)
pA
) 112 dB(A), uncertainty (K) 5 dB(A)
WA
2
) 14,6 m/s , uncertainty (K) 1,5 m/s
h, ID
2
) 3,8 m/s , uncertainty (K) 1,5 m/s
h, D
Declaration of conformity
Regulations 2008
FMEH750- Impact drill
2008/1597 (as amended),
S.I.2016/1091 (as amended).
2012/3032 (as amended).
Stanley Fat Max.
Director - Consumer Power Tools
Stanley Fat Max UK, 270 Bath Road, Slough
ENGLISH
2
2
Ed Higgins
Berkshire, SL1 4DX
United Kingdom
30/09/2021
7