Tabla de contenido
Idiomas disponibles
Idiomas disponibles
If screws are difficult to tighten, try applying a small
u
amount of washing liquid or soap as a lubricant.
Always hold the tool and screwdriver bit in a straight line
u
with the screw.
Maintenance
Your Stanley Fat Max tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
Voltage
V
DC
No-load speed
Min
Beats
BPM
Max. torque
Nm
(PTI Method)
Chuck capacity
mm
Weight
kg
FMC647
18
-1
0-2700
0-3100
180
6 (Hex)
1.2
(Original instructions)
Charger
Input Voltage
Output Voltage
Current
Approx. charge time
Battery
FMC685L
Voltage
V
18
DC
Capacity
Ah
1.5
Type
Li-Ion
Level of sound pressure according to EN 60745:
Sound pressure (L
) 97 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L
) 108 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Fastening with impact (a
) 12.2 m/s
h, IS
EC declaration of conformity
%
MACHINERY DIRECTIVE
Cordless Impact Driver - FMC647
Stanley Europe declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1:2009 +A1:2010, EN60745-2-2:2010
These products also comply with Directive 2004/108/EC (until
19/04/2016) 2014/30/EU (from 20/04/2016) and 2011/65/EU.
For more information, please contact Stanley Europe at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Stanley Europe.
Stanley Europe, Egide Walschaertsstraat14-18,
ENGLISH
905998**
906086**
typ. 1
typ. 1
V
230
230
AC
V
18
18
DC
A
1
2
90 - 240
45 - 120
min
FMC687L
FMC688L
18
18
2.0
4.0
Li-Ion
Li-Ion
2
2
, uncertainty (K) 1.5 m/s
Ray Laverick
Director of Engineering
2800 Mechelen, Belgium
25/02/2016
7
Tabla de contenido
