How it works
This external wall movement detector provides protection for a large external wall, detecting an intruder before
forcible entry occurs, and can distinguish between human beings and pets.
The detector has two detection beams (lower and upper), on either side, which must be broken simultaneously
to trigger an alarm.
The following adjustments can be made:
Angle of the beams, if there is an obstacle
■
Detection range
■
Sensitivity.
■
Introduction
Lens holder
Lenses
Pack contents
1 external wall movement detector
■
2 large screws + 2 anchors (a) for fixing the rear mount
■
2 screws (b) for fixing the base
■
Copyright © 2018 Somfy Activités SA. All rights reserved.
Rear mount
a
compartment
Cover
Base
a
Batter
Mirrors
b
Cover
c
1 locking screw (c)
■
3 LR03 alkaline batteries
■
1 manual
■
b
c
51