Midea MGS30S2AST Instrucciones De Instalación página 8

• This appliance is intended for normal residential use. It is not
approved for commercial use, outdoor installation, or any other
application not specifically allowed by this manual
• Be sure your appliance is properly installed and grounded by a
qualified service provider.
• Installer shall leave all instructions, including this manual, conversion
instructions, and anti-tip bracket instructions, with the owner/resident,
with directions to retain for future reference.
• Do not operate this appliance if it has been damaged or is not working
properly. Contact a qualified service provider for repairs.
• Do not repair or replace any part of the appliance unless specifically
recommended in the manual. All other servicing should be referred to
a qualified service provider.
• Do not use oven cleaners. No commercial oven cleaner or oven liner
protective coating of any kind should be used with any part of this
appliance.
• This appliance should not be installed with a ventilation system that
blows air downward toward the appliance. This type of ventilation
system may cause ignition and combustion problems with the gas
cooking appliance resulting in personal injury or unintended operation.
• Installation must conform with local codes or, in the absence of local
codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54 or, in
Canada, the Natural Gas and Propane Installation Code, CSA B149.1.
• This appliance requires connection to a 3-prong, 120VAC, 60Hz
grounded electrical source. When installed, appliance must be
electrically grounded in accordance with local codes or, in the
absence of local codes, with the National Electrical Code, NFPA 70
or the Canadian Electric Code, CSA C22.1-02.
• A manual valve is to be installed in an accessible location in the gas
piping external to the appliance for the purpose of turning on or
shutting off gas to the appliance.
• Any openings in the wall behind the appliance and in the floor under
the appliance shall be sealed.
8