Spare Parts List - Cembre SD-9P-ECO Manual De Uso

ENGLISH

8. SPARE PARTS LIST

Code N° Item
- 01 Accelerator button
6003755 02 Starter grip
6003754 03 Cap valve
6003753 04 Air fi lter element
6001522 05 Handle grip
6002135 06 Main Handle
6002998 07 Accelerator handle
- 08 Accelerator
6003000 09 I/O switch
6003752 10 Spark plug
6003751 11 Engine
6490054 12 Spindle/Emergency release Handle
6001541 13 Release pin shaft
6001502 14 Spindle body
6001503 15 Spindle shaft
6700050 16 Circlip
6001494 17 Location pin
6340140 18 M 8x8 grub screw
6001527 19 Spindle guide
2870290 20 MND Spindle
2870279 21 PRM-U Detachable guard
6001529 22 Guard retaining nuts
6001493 23 Fixed guard
6001492 24 Spring shaft
6001532 25 Guard return spring
6003263 26 Adjusting device
6740120 27 Ball
6520280 28 Spring
6760344 29 Split pin Ø 6x10
6002133 30 Spigot
6002081 31 Nut
2870286 TPM 200-26 end piece (SD-9P-ECO)
32
2870284 TPM 190-24 end piece (SD-9P2-ECO)
9. FUEL PREPARATION
The drilling machine features a two-stroke petrol engine run on a 2% (1:50) oil/petrol mixture;
a measuring cylinder is supplied showing on the left of the index line, the appropriate marks to
achieve this required mixture.
Use only 2-stroke engine high quality oil.
This engine is certifi ed to operate on unleaded regular grade petrol only.
A minimum of 89 octane on the antiknock index is recommended.
Warning: do not remove or alter in any way, the valve in the cap of the fuel tank.
(See Fig. 10)
DESCRIPTION
The guarantee is void if parts used are not
Qty
Cembre original spares.
1
1
1 When ordering spare parts always specify
the following:
1
- Code number of item
1
- Description of item
1
- Type of drilling machine
1
- Drilling machine serial number
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
2
2
1
2
2
2
1
1
1
1
12