USE & OPERATION (CONTINUED)
ROOM COOLING AND HUMIDIFYING
In cooling mode, Honeywell Air Coolers provide cool, moist air through
the evaporation of water. There is a manual Water Regulator knob located
in the ice compartment of the unit. This allows you to adjust the amount
of water pumped over the Honeycomb Cooling Media, thus helping to
control cooling and humidification levels.
When the Water Regulator is set to MIN, the water pump distributes a
minimal amount of water to the Honeycomb Cooling Media. This results
in less water evaporation and reduces the cooling effect.
When the Water Regulator is set to MAX, the water pump distributes the maximum amount of water
to the Honeycomb Cooling Media. This results in maximum water evaporation and greater cooling
performance.
REMOTE CONTROL
POWER
SPEED
SWING
TIMER
COOL
NATURAL
POWER
:
ON / OFF
SPEED
:
Low / Medium / High
COOL
:
Controls cooling or fan option
SWING
:
Controls the motion of the louvers
TIMER
:
Controls the Timer function for automatic off
NATURAL
:
Turns on Natural mode
EN
4
Water Regulator
MIN
MAX