How To Install; Step 1: Where To Install - Strong SlimSat SA61 Manual Del Usuario

PART 1 • English
The cable between the antenna and the satellite receiver should not exceed 30 m as it will
„
decrease the quality of the signal.
The use of non- isolated jacks will result in a loss of the signal level.
„
Do not forget to adjust the antenna and the bracket to the cross-polarity (skew angle
„
please refer to chapter 3.4 step 4).
Tighten all the screws of the antenna once you have finished the adjustments.
„
This product contains the LNB, it is forbidden to add, change or modify the LNB.
„
For more precise details on the above points or for any information, please ask your
„
retailer or customer service.
Warning!!!
Antennas improperly installed to an inadequate structure are very susceptible to
wind damage. This damage can be very serious or even life threatening. The owner
and installer assumes full responsibility that the installation is structurally sound
to support all loads (weight, wind & ice) and properly sealed against leaks. The
manufacturer will not accept liability for any damage caused by a satellite system due
to the many unknown variable applications.

3.0 HOW TO INSTALL?

By following the instructions step by step you can proceed easily to install SlimSat by yourself or
with the help of a professional antenna installer.
Before installing your antenna check that the SlimSat box contains all items listed in the chapter
'Box Content'. In the event of any missing parts, please contact your distributor.

3.1 Step 1: Where to install?

In order to receive a signal from the satellite, SlimSat is to be installed in an open loop space
(outside the house or the apartment), in the direction of the satellite towards the equator, for which
you will need a compass to exactly orient SlimSat toward the satellite.
Note: Please refer to the table of the Azimuth angles specified in the back pages of this user manual.
Note
To ensure accurate compass reading, stay away from large metal objects, specifically
electrical cables and then make multiple readings.
Make sure that there are no obstacles in front of SlimSat which can decrease the
signal reception quality, such as buildings, or trees (you may keep in mind that
trees will grow and may block the signal).
In order to be able to fix and install your antenna easily you might choose an
easily accessible place without any potential danger for installation.
3