Precor Experience 800 Serie Guía De Montaje página 7

Touchscreen consoles only
To attach the filter to the drive power cable:
1. Disconnect the existing power cable from the drive unit, power filter, and ground
terminal. Then completely remove it from the treadmill (see Figure 6).
2. Connect the new power cable according to Figure 7 and Table 1.
All manuals and user guides at all-guides.com
Figure 6
Figure 7
Position Connector
Drive input connectors
Brown lead with quick-connect terminal
Blue lead with quick-connect terminal
Green and yellow lead with quick-connect terminal
AC input cable to the Networked Fitness Console power cable
3. Use the Velcro® fasteners to attach the power supply to the right side of the
front cross member on the treadmill base.
4. Plug the AC input cable into the socket on the power supply.
5. Route the DC output cable through the cable ties behind the power supply,
toward the upright support on your right. Bend the cable ties over the DC output
cable to hold it in place.
Note Bundle the excess cable and secure it under the cable clips.
6. Connect the black, AC power cord on the AC wiring harness to the socket on the
power supply.
Important The Networked Fitness Console includes an accessory jack panel that you
must install on the treadmill. The panel connects the TV and Ethernet cables to the
facility's network.
Table 1
5