Kohler Veil K-5402-0 Instrucciones De Instalación página 5

2. Mark the Pipes - Wall Side
Outlet Hole
Remove and discard the plaster guards from the inlet and outlet holes.
Apply plumbers grease to the gasket in the opening of the inlet and outlet holes.
Firmly insert the inlet pipe completely into the inlet hole.
NOTE: If the finished wall aligns with any portion of the gasket section of the inlet pipe, no mark or cut is needed.
Use a level or other straight edge to mark the inlet pipe even with the front edge of the finished wall.
Firmly insert the outlet pipe completely into the outlet hole.
NOTE: If the finished wall aligns with the wide part of the outlet pipe, no mark or cut is needed.
Use a level or other straight edge to mark the outlet pipe even with the front edge of the finished wall.
Remove the inlet and outlet pipes.
Kohler Co.
Finished Wall
Outlet Pipe
Inlet Hole
Inlet Pipe
5
Plaster Guards
1247364-2-C