Use The Controller With A Wired Connection; Charge The Controller - Sony Play Station DualSense Edge Manual De Instrucciones

Use the controller with a wired
connection
To use the controller with a wired connection, you first
need to set the connection method. From the PS5 home
screen, select Settings > Accessories > Controller
(General) > Communication Method, and then select
Use USB Cable.
Lock the USB cable to controller
You can lock the USB cable to the controller to stop the
cable from detaching. Open the connector housing and
place the USB cable inside so that the connector protrudes
from the outside. Then, close the connector housing.
Once you connect the USB cable to the controller, use the
connector housing's slider to lock and unlock the USB
cable to your controller.
The connector housing is compatible only with the
included USB cable.

Charge the controller

While your PS5 console is on or in rest mode, connect the
controller to your console using the included USB braided
cable. When charging the controller in rest mode, the light
bar on the controller slowly blinks orange. When charging
is complete, the light bar turns off.
• To charge the controller while in rest mode, you
have to configure the settings. From the PS5 home
screen, select Settings
> Features Available in Rest Mode > Supply Power
to USB Ports, and then select a setting other than
Off.
• You can also charge the controller by connecting it
to your computer or other USB device using a USB
cable. Be sure to use a USB cable that complies with
USB standards. You may not be able to charge your
controller on some devices.
Charging the controller in
the carrying case
You can charge the controller
while it is stored in the carrying
case. Open the flap on the back
of the case and connect the USB
cable to the controller.
> System > Power Saving
EN
17