FROZEN BREAD
Place the bread into the slots then touch the frozen icon f.
1.
2.
Press the lever down to begin toasting. There is no need to change the browning control from your
favourite setting.
The f icon will light up brightly, and the toasting time will be altered automatically to give the same
3.
degree of browning you would get with unfrozen bread.
REHEATING TOAST
Place the cold toast into the slots then touch the reheat icon m.
1.
2.
Press the lever down to begin reheating. There is no need to change the browning control from your
favourite setting.
The m icon will light up brightly, and the toast will be given a short burst of heat.
3.
4.
Don't reheat toast that has been buttered, or torn, or misshapen bread.
TRADITIONAL (TIMED) TOASTING
You can use your toaster in the same way as a traditional (timer based) toaster. This is useful when you
want to cook items like pop tarts or use toasting bags to make toasties.
1.
Turn the browning control to the required setting. The LEDs will light to show the selection you have
made. The more lights that are lit, the longer the toasting cycle.
2.
Put the item to be toasted into the toasting slots.
3.
Press the lever down fully. Touch the Q (timer) icon.
4.
The cancel icon Bwill light up, and the LED lights will fade up and down as the toasting cycle runs.
5.
When the cycle finishes, the item will pop up.
•
The Colour Sense technology does not operate in this mode so there may be variations between
sucessive cycles.
•
The next time you use your toaster it will default back to using Colour Sense technology.
WARMING RACK
Don't use the warming rack to warm frozen, buttered, or items with fillings or coatings.
1.
Fit the warming rack on top of the toaster with the feet inside the slots.
2.
Place the items to be warmed on top of the warming rack.
3.
Turn the browning control until the first LED is lit.
4.
Touch the Q (timer) icon.
5.
When the lever pops up, remove the warmed items.
6.
Don't touch the metal parts of the warming rack as they will be hot.
•
Remove the warming rack before using the toaster normally.
OVERHEAT PROTECTION
It is possible for your toaster to overheat if it is used several times in quick succession. If this happens, the
lever will not latch in the down position. To show that your toaster is cooling down, all six LEDs will come
on then slowly turn off one by one. This pattern will repeat until your toaster has cooled down sufficiently
for it to be operated again normally.
5
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE