UNIT ASSEMBLY CONTINUED
8. Snap eight sets of shelf supports onto the posts with
five grooves visible on all eight posts. Slide two
square shelves onto the posts until shelves slide firmly
over the supports.
9. Repeat step 8 one more time. (See Figure 8)
Figure 8
LEFT SIDE OF THE UNIT
10. Snap four sets of shelf supports onto the left four posts
with twelve grooves visible between the lower shelf.
11. Slide a square shelf onto the posts until shelf slides
firmly over the supports. (See Figure 9)
12. Repeat steps 10 and 11 twice. (See Figure 9)
Figure 9
PAGE 3 OF 9
ASSEMBLY CONTINUED
RIGHT SIDE OF THE UNIT
13. Snap four sets of shelf supports onto two inner posts
and two outer posts. (See Figure 10)
14. Slide the rectangular shelf at the top of the posts until
shelf slides firmly over the supports. (See Figure 10)
Figure 10
15. Slide garment rod hangers onto garment rod.
(See Figure 11)
Figure 11
16. Slide the longer end of garment rod hangers
through the shelf wires. (See Figure 12)
Figure 12
17. Hook the short end of garment rod hangers onto the
center wire of the shelf. (See Figure 13)
18. Pull garment rod
back and down,
one side at a time,
until long end of
garment rod hanger
snaps into place.
1-800-295-5510
uline.com
Figure 13
VIEW FROM
THE BOTTOM
0721 IH-2449