Unit Assembly - Uline H-2449 Manual De Instrucciones

UNIT ASSEMBLY

1. Snap shelf supports into the very bottom groove of
two short and two tall posts. (See Figure 4)
2. Slide posts through underside of square shelf until it
slides firmly over the supports. (See Figure 4)
3. Take the other four tall posts, snap shelf supports into
the very bottom groove on all four posts. Slide posts
through underside of square shelf until it slides firmly
over the supports.
Figure 4
Shelf
Support
4. Position each set of four posts as shown and snap
four sets of shelf supports into the groove directly
above the square shelves of the inner four posts.
(See Figure 5)
Figure 5
PAGE 2 OF 9
ASSEMBLY CONTINUED
5. Slide a square shelf onto the inner four posts until
shelf slides firmly over the supports. (See Figure 6)
Figure 6
6. Snap four sets of shelf supports onto the outer posts with
5 grooves visible, and snap 4 sets of shelf supports on
the inner posts with 3 grooves visible. (See Figure 7)
7. Slide two square shelves onto the posts until shelves
slide firmly over the supports. (See Figure 7)
Figure 7
0721 IH-2449