Volume Setting - FONESTAR ZS-2000M Manual De Instrucciones

EMERGENCY BROADCASTING AND PAGING
The following steps describe how to conduct an emergency broadcast through the ZS-200M:
1. When the EMERGENCY button is pressed, the manual emergency broadcasting mode is initiated as
shown in Figure 4. All the public address or paging would be interrupted.
2. Select the corresponding zone or group of zones as necessary.
A blue status bar appears above selected zones or groups.
3. Select the emergency broadcasting sound sources or make a paging directly as necessary.
Note: Please refer public address and paging to get more detail about paging operation.

VOLUME SETTING

Touch the icon. The interface as shown in Figure 5 appears.
1. The icon shows microphone volume, touch the
2. The icon shows the monitor speaker volume, touch the
volume.
Figure 4 Emergency Broadcasting Mode Interface
Figure 5 Volume Setting Interface
or button to change the microphone volume.
or button to change the monitor speaker
- 9 -
EN