Milnor MilTouch MWF27Z8 Serie Guía Del Operario página 31

2
Chapter
How to Update the Machine Software
BICLUR02 (Published) Book specs- Dates: 20170804 / 20170804 / 20170804 Lang: ENG01 Applic: CLJ
2.1. MilTouch Update: WUMTGUI/2.1.xxx
Does my machine need this update?
2.1.1.
You machine requires this update if the Home screen
than WUMTGUI/2.1.118 or WUMTCOM/21012.
Figure 26: Home Display
.
Machine software WUMTCOM/21012 includes these changes:
• Disable the Door Open button when the Manual Inputs, Outputs, or Analog screen is visible.
• Enable low wash speed.
• Enable extract speed E2.
• Turn off all the outputs when the machine is in Manual mode and the user pushes the Door
Unlock button. Disable the Door Unlock button when the machine is in Manual mode and the
bath level is not below low level.
User interface software WUMTGUI/2.1.xxx included with this document makes these changes:
(Figure
Screen
27
Chapter 2. How to Update the Machine Software
26) shows a software version earlier
Legend
A. Data Exchange button
B.
Software version data
PELLERIN MILNOR CORPORATION