Mode 6 - Customised; Start-Up; Menu Access Commands - PEDROLLO E1 MONO Instrucciones Originales De Uso

MODE 6 – CUSTOMISED
Customised mode (set up according to specific customer
needs)
With this mode, more expert customers are free to decide how to set
the electrical control panel operation by configuring the parameters
as they want.

START-UP

To avoid malfunctions due to setting up and operating the equipment incorrectly, read this manual
carefully and follow the instructions before putting the equipment into service.
Prime the pumps (filling and bleeding the air) before starting up the system.
After making all the electrical and plumbing connections correctly, enter the configuration menu to set the correct parame-
ter values for the kind of operation to be performed by the system.

MENU ACCESS COMMANDS

• Press the ON/OFF key to take the control panel OUT OF SERVICE (OFF)
• Press the + +
• Press the or key to display the various set MENUS
The display will remain in this state for 1 minute, after which it will exit automatically if no other buttons have been
pressed. The backlighting of the programming menus will
keys simultaneously for 3 seconds
Factory configuration
Parameter Value
to be configured
EMPTYING
RUN
OFF
SENS L
RUN
IN1
RUN
IN2
LOGIC ALTERN.
DRY RUN EN OFF
DRY LOGIC COS
ON
COSFI REC
2 min
REC TIME
60 min
MAX REC T
3.0 bar
P1
DP1 0.5 bar
ENGLISH |
49