Idiomas disponibles
Idiomas disponibles
•
FM full scan
You can always carry out a new scan of FM channels by selecting this option.
All current presets and channels will be erased.
The radio channel at the lowest frequency of the scanned values will be highlighted. The preset list will be saved
unless a new preset scan is carried out.
•
FM station list
You can adjust the preset ranking by Move down, Move up or Delete it. Highlight one of the presets, then press the
[►] button, it will enter the Edit menu. Press the [◄] button to return to the Preset list.
Local Radio
The radio is set by default to detect the radio stations in your local area automatically by internet connection and these
stations can be accessed by pressing the [Local] button on the remote. You can also set "Local" in another region if desired.
Highlight Local Radio and press [OK]. Choose Manual-set Local radio to change the region setting.
Playback Setup
This is to set the mode of playback under UPnP/DLNA compatible streaming: Repeat All, Repeat One, Shuffle and Normal.
Resume play options
This is to setup the device whether to return to the last operating mode when it is switched on or to display the home screen.
Power-On Options
This is to select the state of the radio after a power reset or power cut, whether to return to Standby or the state subject to
the option selected from the "Resume play options".
Dimmer
You can set the backlight level for the display as you prefer. There are two settings: Mode and Level.
•
Mode - Normal or Power Saving
Normal - the display will stay with the same level of brightness all the time without dimming down.
Dim - the display will dim down after 20 seconds, if no input is made on the radio.
•
Level - Bright and Dim
Bright - This is to adjust the level of brightness in Normal mode.
Dim - This is to adjust the level of brightness in Dim mode.
•
Dimmer in Standby
The display brightness in standby mode can be adjusted manually by turning the rotary knob [Scroll/Select] or
pressing the [▼/▲] buttons on the remote. If no input is registered within 20 seconds, it will restore to the dim
value as set in Configuration.
EQ (Equaliser)
Various music genres can be set.
Buffer Time
Sometimes you may experience uneven playback of the internet radio. This can happen if the internet connection is slow or
network congestion occurs. To help improve the situation, you can choose longer buffer time to get a few seconds of radio
stream before beginning to play.
The default value is 2 seconds. You can choose 5 seconds if you prefer to have a longer buffer time.
AUX in Gain
If the volume level of the connected auxiliary device is too small even the volume on the device is set to maximum, you may
want to adjust the gain to 6dB to achieve a higher volume level.
Reset CD Door
In case the CD cannot be ejected, select this option and choose Yes to confirm. It will take a few seconds to release the CD.
Information
View the Network and System Information of your radio. To access this information quickly, press the [Info] button on the
remote control. When you use your PC to manage My favorite stations, you must use the IP address and you can view this
info from here. Then, type in the IP address (Configuration > Information > Network-Information > IP) to your PC's browser
input window.
Software Update
There may be software released to upgrade features of the radio from time to time.
Check the update regularly to keep your radio up to date with the latest software.
Reset to Default
You can do the reset to clear all the settings and return to default settings.
Note: all the station presets, settings and configurations will be erased after you have performed the reset.
14
