Storage; Service; Troubleshooting - Shop-Vac 2TM Serie Manual Del Usuario

Before storing your vacuum the tank should be emptied and cleaned. Attach vacuum to toolbox.
The power cord can be wrapped around the cord wraps provided on the tank cover on front of
vacuum. Accessories may be stored in the toolbox so they can be readily available.
liquids to sit in the tank for any extended period of time. The vacuum should be stored
indoors.
Do not attempt to service your Shop-Vac
Refer all other servicing to a qualified service center.
PROBLEM
Parts/accessories
missing
Vacuum cleaner
will not start
Dust discharging
from exhaust
Loss of suction
Static shock
All manuals and user guides at all-guides.com

STORAGE

SERVICE

wet/dry vacuum cleaner beyond that described in this manual.
®

TROUBLESHOOTING

POSSIBLE CAUSES
1. Packed in tank
1. No power at receptacle
2. Defective switch
3. Defective motor
1. Filter not installed/not installed
properly
2. Filter damaged
3. Filter clogged or dust is too fine 3. Use more efficient filter
4. Filter not functional
1. Loose hose connection
2. Filter clogged
3. Full tank
4. hole in hose
1. Dry environment
2. Relative humidity of air is low
Never allow
SOLUTION
1. Check in tank
1. Check for power
2. Contact Shop-Vac
customer service
3. Contact Shop-Vac
customer service
1. Properly install filter
2. Replace filter
4. Clean or replace filter
1. Tighten hose connection
2. Clean or replace filter
3. Empty tank
4. Replace hose
1. Add moisture to air (if
practical, use a console
or installed humidifier).
2. This situation is temporary
and does not affect the use
of the vacuum cleaner.
®
®
PAGE 9