Maxon 250477 Instrucciones página 2

LIFT CORPORATION Sht. 2 of 10 DSG#
2. Position the in-cab switch (Kit item)
on a panel in the vehicle cab (FIG.
2-1). For mounting the switch,
refer to dimensions in FIGS. 2-2
and 2-3. Use a 10 mm drill bit to
drill mounting hole for the switch.
© MAXON Lift Corp. 2017
M-88-38
IN-CAB SWITCH IN VEHICLE CAB
3/8"-32
BUSHING
5/16"
ON
OFF
IN-CAB SWITCH DIMENSIONS (SIDE VIEW)
FIG. 2-2
KNOB
HEX NUT
15/16"
5/8"
IN-CAB SWITCH DIMENSIONS (TOP VIEW)
Rev. B Date: 06/21/17
SWITCH
CAB
FIG. 2-1
1-9/32"
7/32"
PAL NUT
1-1/8"
FIG. 2-3
IN-CAB
7/8"