Motion CM-09 Manual página 22

19
Channel select 5 channel remote
Channel select makes it possible to copy blinds in between channels/remotes without having
to physically press the program button on the motors.
Select the channel
19.1
from which the
blinds must be
copied.
All blinds in the selected
19.3
channel will start
stepping, indicating
program mode has been
activated. All blinds
can be copied to a new
channel on the same
remote or other remote.
Select a new channel on
the (new) remote.
20 Channel select 15 channel remote
Channel select makes it possible to copy blinds in between channels/remotes without having
to physically press the program button on the motors.
Select the channel
20.1
you would like to
copy.
1
All blinds in the selected 3
20.3
channel will start
stepping, indicating
program mode has been
activated. All blinds
can be copied to a new
channel on the same
remote or to other
remotes. Select a channel
on a (new) remote.
MOTION CM-09/10 ELECTRONIC TUBULAR MOTOR
To activate
19.2
channel select
simultaneously
hold the channel
selection button
and press the pair
button.
Press the pair
19.4
button on the (new)
remote to pair the
blinds to the new
channel.
1 1
To activate
20.2
channel select
simultaneously hold
the channel selection
button and press the
pair button.
3 3 Press program
20.4
button on the (new)
remote to pair the
blinds to the (new)
remote.
1 1 1 1
3
3 3
+
To exit channel
19.5
select go back to the
channel selected at
step 19.1 and repeat
step 19.2
+
3 To exit channel
20.5
select choose
the channel you
selected at step 20.1
and repeat step 20.2
3 3 3